WABSUS Steel | How Are Silos Fabricated? | Enquiries welcome across India

How Are Silos Fabricated?Steps and key parts in the fabrication of steel storage silos

A steel silo looks simple from outside. This guide explains how one is made, from flat plate to a finished vessel on its supports.

Best suited to projects with an indicative value of ₹10 lakh and above. Larger projects welcome.

Send Your RFQ

Get a quotation from our team. Share a short brief now, drawings can follow.

Add weight and project details (optional)

Your details are used only to respond to this enquiry.

Fabrication Steps

  1. Plate layout and cuttingPlates are laid out to the drawing and cut for shell courses, roof and hopper cone.
  2. RollingPlates are rolled into curved sections.
  3. Shell weldingRolled sections are fitted and welded into shell courses.
  4. Hopper cone and roofThe conical bottom and roof are fabricated.
  5. Stiffeners, nozzles and openingsStiffeners, nozzles and manways are fitted.
  6. Supports, ladders and platformsSupport legs or skirt, access ladders and platforms are added.
  7. Inspection and finishingChecks and finishing are done as specified.
  8. Dispatch and site assemblyLarge silos are often sent in sections and assembled on site.

Key Parts of a Silo

  • Shell courses
  • Roof
  • Conical hopper bottom
  • Outlet
  • Support legs or skirt
  • Ladders, platforms and handrails

Related Reading

See tank vs silo and our tank and silo fabrication page.

Why Large Silos Are Built in Sections

A large silo may be too big to transport whole. It is then fabricated in sections or shell courses, checked, and assembled and welded on site. Planning where the sections split, and how they will be lifted, is part of the project.

Design Details That Affect Fabrication

  • The slope of the hopper walls and the size of the outlet
  • Stiffening rings and supports
  • Wall thickness, which can change from course to course
  • Opening positions and reinforcement
  • Access ladders and platforms

What to Specify When Ordering

  • Capacity and dimensions
  • The material to be stored and its properties
  • Design code
  • Material and grade
  • Finish or lining
  • Delivery location and whether you need site assembly

Need fabrication for your project?

A short brief is enough to start. Drawings can follow.

Send RFQ

Frequently Asked Questions

Are silos assembled on site?

Large silos are often fabricated in sections and assembled on site. The method depends on size and transport limits.

What material are silos made of?

Material and grade are specified by you or agreed during engineering coordination.

Send Your Fabrication RFQ

Share drawings or a short brief and our team will respond with a quotation.

WhatsApp Call