WABSUS Steel | What Is Heavy Fabrication? | Enquiries welcome across India

What Is Heavy Fabrication?A plain guide to heavy steel fabrication for plant and project teams

Heavy fabrication turns thick steel plate and large sections into big, load-bearing or pressure-containing items. This guide explains what it is, what it makes, and what to check when you buy it.

Best suited to projects with an indicative value of ₹10 lakh and above. Larger projects welcome.

Send Your RFQ

Get a quotation from our team. Share a short brief now, drawings can follow.

Add weight and project details (optional)

Your details are used only to respond to this enquiry.

Heavy Fabrication Defined

Heavy fabrication is the process of cutting, forming, fitting and welding thick steel plate and large sections into large finished items such as girders, columns, tanks, silos, hoppers and vessels. These items are heavy, carry large loads or contain material, and usually need inspection.

Heavy vs Light Fabrication

Light fabricationHeavy fabrication
MaterialThin sheet, tube and light sectionsThick plate and large sections
Typical itemsFrames, covers, small assembliesGirders, tanks, silos, hoppers, vessels
HandlingManual or light liftingCranes and heavy lifting
InspectionOften visualOften agreed inspection and testing

What Heavy Fabrication Makes

  • Plate girders, columns and bracing
  • Storage tanks and silos
  • Hoppers, bins and chutes
  • Pressure vessels and heat exchangers
  • Pipe racks, platforms and access structures
  • Equipment support structures

How a Heavy Fabrication Job Runs

A typical job moves from drawing review to material preparation, cutting and forming, fitting, welding, inspection, finishing and dispatch. See our guide to the steel fabrication process for each step.

What to Check When Buying Heavy Fabrication

Make sure the scope, material, design code and inspection requirements are written down, and ask who actually fabricates the work and who manages quality. Our guide on choosing a steel fabrication contractor has a checklist.

Materials and Thickness

Heavy fabrication works with steel plate and sections of significant thickness. Mild steel is common, and the material and grade for a project are specified by the buyer or agreed during engineering coordination. Thickness affects cutting, forming, welding procedures and inspection, which is why heavy jobs plan these steps carefully.

Industries That Buy Heavy Fabrication

  • Steel plants: handling, structures and process equipment
  • Cement plants: silos, hoppers, chutes and supports
  • Power plants: ash handling, pipe racks, platforms and ducting
  • Mining and mineral processing: chutes, hoppers and bins
  • Process industries: tanks and vessels
  • EPC contractors: fabrication packages to project drawings

Terms You Will Hear

  • General arrangement (GA) drawing: shows the overall layout of an item or structure
  • Fabrication drawing: shows each part and how it is made
  • Welding procedure: the agreed method for making a weld
  • Non-destructive testing (NDT): checking welds without damaging them
  • Inspection and test plan: the agreed list of checks for a job

Common Buying Mistakes

  • Starting without a written scope
  • Not agreeing inspection requirements up front
  • Comparing quotes on price only
  • Not asking for a schedule
  • Not asking who actually fabricates the work

Need fabrication for your project?

A short brief is enough to start. Drawings can follow.

Send RFQ

Frequently Asked Questions

Is heavy fabrication the same as structural fabrication?

Structural fabrication is one part of it. Heavy fabrication also covers tanks, silos, hoppers, vessels and other heavy items.

What industries use heavy fabrication?

Steel, cement and power plants, mining and mineral processing, process industries and EPC projects.

Send Your Fabrication RFQ

Share drawings or a short brief and our team will respond with a quotation.

WhatsApp Call