Steel Fabrication Cost per KgWhy there is no single rate and what decides the price of fabrication
Many buyers ask for a per-kg rate. A single rate rarely reflects the real cost. This guide explains what decides the price and how to get an accurate quotation.
Best suited to projects with an indicative value of ₹10 lakh and above. Larger projects welcome.Why a Single Per-Kg Rate Can Mislead
Two items of the same weight can cost very different amounts to fabricate. A simple frame and a pressure vessel of equal weight need different material, welding, inspection and finishing. A per-kg rate hides these differences.
What Decides the Price
| Factor | Why it matters |
|---|---|
| Material and grade | Grade and plate thickness change material cost and welding effort |
| Complexity | More cutting, forming, fitting and welding takes more time |
| Welding and inspection | Tests and inspection add work and documentation |
| Surface treatment | Blasting and coating or galvanizing add cost |
| Quantity | Repeat items are often cheaper per piece |
| Delivery and erection | Transport, lifting and site work add to the total |
How to Get an Accurate Quotation
Send the details below and ask for the quotation to state scope, material and what inspection is included.
- Drawings or general arrangement (PDF or DWG)
- Material and grade
- Approximate weight or quantity
- Design code and inspection requirements
- Delivery location and site access
- Required delivery date and whether you need erection
Next Step
You can send an RFQ and we will quote against your scope.
Why Two Items of Equal Weight Differ
| Simple frame | Pressure vessel | |
|---|---|---|
| Welding | Basic joints | Quality-critical joints |
| Inspection | Often visual | Agreed inspection and tests |
| Forming | Little or none | Rolling and shaped heads |
| Documentation | Light | As agreed for the project |
How to Keep Cost Under Control
- Freeze drawings before fabrication starts
- Use standard sizes where the design allows
- Specify the inspection you need, and no more
- Group quantities into one order where possible
- Plan delivery and erection early
Mistakes That Raise Cost
- Design changes after material is ordered
- Unclear scope that grows during the job
- Late delivery information
- Choosing on price without comparing scope
Need fabrication for your project?
A short brief is enough to start. Drawings can follow.
Frequently Asked Questions
Can you give a per-kg rate?
We quote against your drawings and scope rather than a single rate, because the cost depends on the factors above.
Is a lower quote always better?
Compare scope, material, inspection and finishing, not only the price.
Send Your Fabrication RFQ
Share drawings or a short brief and our team will respond with a quotation.